Bienvenido a Asmik
Casa > Productos > Nivel > Transmisor de nivel de radar > Medidor de nivel por radar de material sólido RD905

Medidor de nivel por radar de material sólido RD905

Medidor de nivel de radar RD905 con alta frecuencia, medición de partículas sólidas, constante de polvo de la mejor opción.


Especificación

 Product Radar level meter
 Model SUP-RD905
 Measure range 0-30 meters
 Application Solid particles, powder
 Process Connection Thread, Flange
 Medium Temperature -40℃~250℃
 Process Pressure -0.1~4.0 MPa (flat flange); -0.1 ~ 0.3 MPa (universal flange)
 Accuracy ±10mm
 Protection Grade IP67
 Frequency Range 26GHz
 Signal Output 4-20mA (Two-wire/Four)
RS485/Modbus
 Power supply 2-wire(DC24V)/ 4-wire(DC24V /AC220V)

 

Introducción

雷达11.jpg

Tamaño del producto

radar level meter size

  • Guía de instalación
level meter level meter level meter
Be installed in the diameter of the 1/4 or 1/6.

Note: The minimum distance from the tank

wall should be 200mm.

Note:  ① datum

②The container center or axis of symmetry

The top conical tank level, can be installed at

the top of the tank is intermediate, can guarantee

the measurement to the conical bottom

 A feed antenna to the vertical alignment surface.

If the surface is rough, stack angle must be used

to adjust the angle of cardan flange of the antenna

to the alignment surface.

(Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.)

 

Consulta:

*No dude en dejar sus necesidades aquí, se le proporcionará un presupuesto competitivo de acuerdo con sus requisitos.

*
*
Por favor elija:
*